I've been working on a malifaux Wild West Town for a few months now. Most of the town is built of of hirst arts Wooden Plank Mold #220. I've created a few of my old molds off of casts from this mold. I've been posting this on another site so here is a copy of that blog.
First I made it out of paper to make sure the sizes were correct:
With the Paper one looking good, I build this frame out of 1/8 inch Basswood:
I created a door and window out of wood and plasticard and then decide to make a mold of it:
I'm using my hirst arts mold #220 to make the wood for this. Here is the front with some attached:
Here is the back I'm playing to put a angled roof on it:
Finished painting my prototype building:
I started construction of my second building. I decided to make this one playable inside. The roof and door will be removable. I also created new molds so I can cast up an entire wall in one go. I cast up a bunch of pieces and washed them:
Here I glued wood sections together so I can later cut them into squares.
Here I was cutting them up into squares for my inside bottom and four sides.
Internal box all cut out.
Cut out a doorway.
Layout before gluing
Here I had just glued the box together. The tape is to hold it till it drys.
After it dried
Adding the exterior panels to the box
Exterior applied
Roof glued together:
Front view with sign added:
I wanted a better door so here is the master I made:
The new door mold:
All the pieces for the building
Preview with it dry fit together:
Dry Goods Store:

I've assembled the Cartwright. I still need to do some green stuff work on it but here is a preview.


New fireplace as I found I had a mold for this.
Buildings so far painted up.




Two Story Under Construction:

Town in use:
First I made it out of paper to make sure the sizes were correct:

With the Paper one looking good, I build this frame out of 1/8 inch Basswood:
I created a door and window out of wood and plasticard and then decide to make a mold of it:
I'm using my hirst arts mold #220 to make the wood for this. Here is the front with some attached:
Here is the back I'm playing to put a angled roof on it:
Finished painting my prototype building:
I started construction of my second building. I decided to make this one playable inside. The roof and door will be removable. I also created new molds so I can cast up an entire wall in one go. I cast up a bunch of pieces and washed them:
Here I glued wood sections together so I can later cut them into squares.
Here I was cutting them up into squares for my inside bottom and four sides.
Internal box all cut out.
Cut out a doorway.
Layout before gluing
Here I had just glued the box together. The tape is to hold it till it drys.
After it dried
Adding the exterior panels to the box
Exterior applied
Roof glued together:
Front view with sign added:
I wanted a better door so here is the master I made:
The new door mold:
All the pieces for the building
Preview with it dry fit together:

Dry Goods Store:

I've assembled the Cartwright. I still need to do some green stuff work on it but here is a preview.



New fireplace as I found I had a mold for this.

Buildings so far painted up.




Two Story Under Construction:

Town in use:
