Let's see - I made my FaceBook project album public, so these should port over...
First picture was this morning - the mold had been curing for about 16 hours at this point (18 hour cure time to demold)

This picture shows the 4 ounce Solo cup - I cut one down slightly to save on mold rubber.

This shot shows after the 18 hour cure, removing the plastic cup and model clay seal.

Here's a picture of the mold next to the masters

Shot of the mold, trying not to be too blurry and still show the detail

Different angle of the finished mold.

All pieces are modified Hirst pieces. I have plans....
First picture was this morning - the mold had been curing for about 16 hours at this point (18 hour cure time to demold)

This picture shows the 4 ounce Solo cup - I cut one down slightly to save on mold rubber.

This shot shows after the 18 hour cure, removing the plastic cup and model clay seal.

Here's a picture of the mold next to the masters

Shot of the mold, trying not to be too blurry and still show the detail

Different angle of the finished mold.

All pieces are modified Hirst pieces. I have plans....
